Is SPC Flooring Good? An Honest Look

We sell SPC flooring, so you might expect us to say it's perfect. It isn't. No floor is. But for a lot of homes, especially in Florida, it's a very good fit. Here's a plain look at what SPC does well, where it falls short, and how to decide whether it's right for your project.

First, what SPC flooring is

SPC stands for stone plastic composite. It's a type of luxury vinyl plank built on a rigid core made of powdered limestone, PVC and stabilizers. On top of the core sits a printed design layer that looks like wood, and over that a clear wear layer that protects the surface. Many SPC planks, including ours, click together as a floating floor and have a foam pad attached underneath.

What SPC does well

It shrugs off spills. SPC is commonly sold as a waterproof floor, and our click-lock lines are listed as waterproof, so surface spills won't swell the planks like laminate or hardwood can. That's why people choose it for kitchens, baths and laundry rooms.

It stays stable. The dense core holds its size well when temperature and humidity change. That helps in a climate like ours.

It's tough on the surface. Durability mostly comes from the wear layer, measured in mil. Our lines carry 20 or 22 mil, which handles everyday life with kids and pets well.

It resists dents. Because the core is rigid and dense, SPC generally resists dents from furniture better than softer, flexible vinyl.

It's DIY-friendly. Click-lock planks don't need glue or nails. Many handy homeowners install them on their own, which can save on labor.

It goes over a slab. Most Florida homes sit on concrete. SPC floats over a slab that's flat, clean and dry, with prep done per the instructions.

It's easy to clean. Sweep or vacuum, then damp-mop with a cleaner suited to vinyl floors. No waxing and no refinishing.

It looks like wood. Modern printing and texture make SPC look convincingly like timber. Some lines add texture that follows the printed grain, called embossed in register.

Where SPC falls short

It's firm underfoot. SPC is harder than carpet or softer vinyl cores. An attached pad helps, but if you stand in the kitchen for hours, a cushioned mat is a good idea.

It isn't real wood. You can't sand and refinish it. When the wear layer is worn through, the plank needs replacing. That's why the wear layer number matters.

It needs a flat subfloor. A rigid plank bridges small flaws better than flexible vinyl, but real dips and humps have to be fixed first, or the click joints can be stressed.

Replacing one plank can take work. On a floating floor, swapping a damaged plank in the middle of a room may mean unclicking a run of planks from the nearest wall. Keep a few spare planks from your order.

"Waterproof" has limits. The planks resist water, but water that gets underneath from a leak or flood can still damage the subfloor and walls. Clean up standing water quickly.

It can be scratched. Grit and sand under shoes or chair legs act like sandpaper. Mats at the doors and felt pads on furniture make a big difference.

The boxes are heavy. A dense core means heavy boxes. Ours weigh about 42 to 65 lb each, depending on the line. Plan your pickup or delivery for that.

Who SPC is a good fit for

  • Families with kids and pets
  • Homes on concrete slabs
  • Kitchens, baths, laundry rooms and pool-side living areas
  • Rental properties that need a durable, easy-to-clean floor
  • DIYers who want a click-lock install
  • Commercial spaces, using a glue-down SPC plank where floor height is tight

Who might want something else

  • People who want a floor they can sand and refinish for decades
  • Anyone whose top priority is a soft, cushioned feel underfoot
  • Spaces that aren't climate-controlled, unless the instructions allow it

How to make SPC last

  1. Choose a wear layer that suits your traffic: 20 mil for most homes, 22 mil for heavy use.
  2. Prep the subfloor properly, and test slabs for moisture.
  3. Acclimate the boxes and keep the AC running.
  4. Leave the expansion gap at the walls.
  5. Use mats, felt pads and a vinyl-safe cleaner.
  6. Keep spare planks from the same order.

The SPC lines we carry

Everything we sell is Lexi Products LVP with an SPC core. The click-lock lines all have a 1 mm IXPE pad attached:

  • Ocean View: 5.2 mm, 20 mil wear layer, 7 × 48 inch planks.
  • Iris: 5 mm, 20 mil, 7 × 48 inch planks, $1.99 per sq ft (prices can change).
  • Azura: 6 mm, 22 mil, 9 × 60 inch planks.
  • Ankh Pro: 5.5 mm, 20 mil, 9 × 60 inch planks, 30.2 sq ft per box.
  • NYF: 7 mm, 22 mil, 9 × 60 inch planks, embossed in register.

Plus Adhere, a 2.3 mm glue-down SPC plank for commercial spaces. Ask us about warranty terms for the line you choose.

So, is SPC flooring good?

For most Florida homes, yes. It handles spills, humidity and busy households well and goes over a slab without fuss, as long as you choose a solid wear layer and prep the floor properly. If you want a soft feel or a floor you can refinish, look at other options.

Ask us anything

We sell flooring and don't install it, but we'll answer your questions straight. Visit Orlando Floor Depot at 1168 Spruce Ave, Unit 124, Orlando, FL 32824, Monday to Friday, 8 AM to 4 PM. Call (407) 868-9355 or (321) 332-2847, or request a quote. We ship anywhere in the U.S. except California. See areas we serve.

Is SPC flooring good for Florida?

For most Florida homes, yes. It handles humidity well, goes over concrete slabs and resists spills. Keep the home air-conditioned and prep the slab properly.

How long does SPC flooring last?

That depends mostly on the wear layer, the traffic and the care it gets. A thicker wear layer, mats at the doors and felt pads all help. Ask us about warranty terms for the line you choose.

Is SPC better than laminate?

For wet areas, SPC has the edge, because laminate usually has a wood-fiber core that can swell when wet. Both click together as floating floors.

Can SPC flooring go in a bathroom?

Yes, bathrooms are a common place for waterproof SPC. Follow the installation instructions for gaps around tubs and toilets, and call (407) 868-9355 or (321) 332-2847 with questions.