Shop for a new floor for ten minutes and you'll run into a pile of letters: LVP, LVT, SPC, WPC. The SPC vs LVP question is one we hear every week at our Orlando showroom, and the short answer surprises people. SPC isn't an alternative to LVP. It's a kind of LVP. Here's how it all fits together, what actually changes from one floor to the next, and how to choose.
LVP is the category
LVP stands for luxury vinyl plank. It describes what the floor looks like and how it's sold: long planks with a realistic wood look, made with vinyl. LVT, luxury vinyl tile, is the same idea in tile shapes. Under that umbrella, the big difference between products is the core, the thick middle layer that gives the plank its body. The core is where SPC comes in.
The three common LVP cores
- Flexible vinyl. The original style. The plank is thin and bendable, and it's usually glued down. It follows the shape of the subfloor closely, so bumps and dips can show through.
- WPC (wood plastic composite). A thicker core with a foamed structure. It tends to feel a little softer and warmer underfoot, and it's usually a click-lock floating floor.
- SPC (stone plastic composite). A dense, rigid core made from powdered limestone, PVC and stabilizers. Some people call it stone polymer composite or solid polymer core. It's stiff, heavy for its thickness and very stable in size.
So when someone asks "SPC vs LVP," they usually mean "rigid-core SPC plank vs a traditional flexible vinyl plank," or sometimes "SPC vs WPC." Both are fair questions, so we'll cover both.
How the layers stack up
Most SPC planks, including the Lexi Products lines we sell, are built in layers:
- Wear layer: a clear top coat, measured in mil (thousandths of an inch). This is what takes the scuffs. Our lines have 20 or 22 mil.
- Design layer: the printed image of the wood grain.
- SPC core: the rigid stone-plastic center.
- Attached pad: on our click-lock lines, a 1 mm IXPE foam pad bonded to the back.
Don't mix up the two thickness numbers. Total plank thickness is in millimeters (our lines run from 5 mm to 7 mm for click-lock). Wear layer thickness is in mil. A thicker plank doesn't automatically mean a thicker wear layer, so check both.
SPC vs traditional flexible LVP
Rigidity. SPC is stiff. That makes it more forgiving of small subfloor imperfections, because the plank bridges them instead of sinking into them. Flexible vinyl shows what's underneath.
Stability. The dense core resists expanding and contracting with temperature better than flexible vinyl. That's a big deal in Florida, where homes can heat up fast when the AC is off or the sun hits a sliding door.
Dents. Because the core is dense, SPC generally resists dents from furniture legs better than softer vinyl. Use felt pads either way.
Installation. Rigid-core planks are usually click-lock floating floors. That's why many homeowners install them on their own. Flexible vinyl is often glued down, which is a messier job.
Height. Flexible glue-down planks are thin. That can be useful in commercial spaces or where a door won't clear a thicker floor.
SPC vs WPC
The foamed WPC core usually feels a bit softer and quieter underfoot. The SPC core is denser and harder, which tends to mean better dent resistance and more stability, at the cost of a firmer feel. An attached pad, like the 1 mm IXPE pad on our click-lock lines, helps with comfort and sound.
Quick comparison
| SPC (rigid core) | Flexible LVP | WPC | |
|---|---|---|---|
| Core | Dense stone-plastic | Thin vinyl | Foamed wood-plastic |
| Feel underfoot | Firm | Thin, follows subfloor | Softer |
| Subfloor flaws | More forgiving | Shows them | More forgiving |
| Typical install | Click-lock floating | Glue-down | Click-lock floating |
| Dent resistance | Generally best | Lower | Moderate |
Which should you choose?
- Most Florida homes: rigid-core SPC with click-lock planks. It's stable, handles busy households and goes over a concrete slab as a floating floor.
- Commercial spaces or tight door clearances: a thin glue-down plank.
- Comfort is the top priority: SPC with an attached pad, plus area rugs where you stand the most.
Five questions to ask about any plank
Labels vary from store to store, so skip the acronyms and ask these instead:
- What's the core made of? Stone-plastic, foamed wood-plastic or flexible vinyl.
- How thick is the wear layer, in mil? This matters more for durability than total thickness.
- Is a pad attached? If not, ask what underlayment the instructions allow.
- Click-lock or glue-down? This decides how the floor goes in and how easily you can do it yourself.
- What are the plank size and box coverage? These tell you how the floor will look and how many boxes to buy.
Any good flooring seller should be able to answer all five without hesitating.
What we sell
Every floor at Orlando Floor Depot is LVP with an SPC core, from Lexi Products. Five lines are click-lock with an attached pad and are listed as waterproof: Ocean View (5.2 mm, 20 mil), Iris (5 mm, 20 mil), Azura (6 mm, 22 mil), Ankh Pro (5.5 mm, 20 mil) and NYF (7 mm, 22 mil). The sixth, Adhere, is a 2.3 mm glue-down SPC plank with a 20 mil wear layer and no pad, made for commercial spaces. It's a good example of how "SPC" and "glue-down" can go together.
See them side by side
The easiest way to settle SPC vs LVP is to hold the planks. Visit us at 1168 Spruce Ave, Unit 124, Orlando, FL 32824, Monday to Friday, 8 AM to 4 PM. Call (407) 868-9355 or (321) 332-2847, or request a quote. We ship anywhere in the U.S. except California. See areas we serve.
Is SPC better than LVP?
SPC is a type of LVP. Compared with flexible vinyl plank, rigid-core SPC is stiffer, more stable in size and generally more dent-resistant. Flexible vinyl is thinner and usually glued down.
Is SPC the same as WPC?
No. Both are rigid-style cores, but WPC has a foamed core that feels softer, while SPC's stone-plastic core is denser and firmer.
What does "mil" mean on a wear layer?
A mil is one-thousandth of an inch. It measures the clear top layer that protects the floor. Our lines have 20 or 22 mil wear layers.
Can SPC be glued down?
Some SPC is made for glue-down. Our Lexi Adhere line is a 2.3 mm glue-down SPC plank. Our other lines are click-lock floating floors.